HERE ARE THE STEPS TO RENT TO OWN:
1. Have a valid driver's license
2. If you rent or lease your home, have your landlord fill out the consent form above.
3. Fill out the Spa Guy Rent To Own Application Questionnaire. [We don't do a credit check]
4. Once approved, choose your tub, pay the deposit and the first month's rent and prepare for delivery.
HERE ARE THE STEPS TO DELIVERY: [Once You have been approved and picked out your tub]
1. You will need a flat level service to set your hot tub on. It can be concrete, paving stones or wood but must be solid and level.
2. Make access to the spot where the tub will be placed. No tubs are installed where they cannot be easily removed. No higher than 7 steps.
3. Have a water source readily available with a hose.
4. Have an electrical source readily available.
a. If it's a 115v tub you will need a 115v GFCI protected plug within 10 ft. of the tub.
b. If it's a 230v tub you will need an electrician to wire a 50 amp breaker from the house breaker box to a 50 amp GFCI not closer than 5 ft. or further than 15 ft. to the tub. Then wire from the 50 amp GFCI box a whip in conduit long enough to reach inside the tub to the control box. Most tubs require 6/3 wire with a ground.
We will place the tub in the position that you want, fill it and tie in the existing wire you provide. We will then verify all operations, teach the chemical program we provide, install any extra purchased accessories, secure the cover, and give you the keys.
1. Have a valid driver's license
2. If you rent or lease your home, have your landlord fill out the consent form above.
3. Fill out the Spa Guy Rent To Own Application Questionnaire. [We don't do a credit check]
4. Once approved, choose your tub, pay the deposit and the first month's rent and prepare for delivery.
HERE ARE THE STEPS TO DELIVERY: [Once You have been approved and picked out your tub]
1. You will need a flat level service to set your hot tub on. It can be concrete, paving stones or wood but must be solid and level.
2. Make access to the spot where the tub will be placed. No tubs are installed where they cannot be easily removed. No higher than 7 steps.
3. Have a water source readily available with a hose.
4. Have an electrical source readily available.
a. If it's a 115v tub you will need a 115v GFCI protected plug within 10 ft. of the tub.
b. If it's a 230v tub you will need an electrician to wire a 50 amp breaker from the house breaker box to a 50 amp GFCI not closer than 5 ft. or further than 15 ft. to the tub. Then wire from the 50 amp GFCI box a whip in conduit long enough to reach inside the tub to the control box. Most tubs require 6/3 wire with a ground.
We will place the tub in the position that you want, fill it and tie in the existing wire you provide. We will then verify all operations, teach the chemical program we provide, install any extra purchased accessories, secure the cover, and give you the keys.
